![]() ![]() If that works, and you get more reliable reception, then that would confirm that your biggest problem is coming from the simulcast. The very strong signal for that site may wash out the out of synch signals from the rest of the simulcast sites. Then, start up the scanner using the car or truck's power instead of power from an ac socket at home. If you have the DC power card, for use in your vehicle, that should have come with the scanner, you can also take a short drive to as close as practical to one of the sites. ![]() You could also use a directional antenna, aimed at a specific site, preferably one that is in a different direction from a group of the other sites. ARC500 BASIC for Whistler WS1040/WS1065 ARC500 PRO for Whistler WS1040/WS1065 ARC Patrol for homepatrol 1-2 ARC5 for Icom IC-R5 ARC6 for Icom IC-R6 ARC20 for Icom IC-R20 ARC30 for Icom IC-R30 ARC135 for RadioShack PRO-135. Downloads and USB Flash Drives sold separately. ARC500 PRO is dedicated programming software for the following scanners: Whistler WS-1040 & WS1065. Sometimes, a move of only a few feet makes way more difference than you thought it would. Note: This product is non-returnable for credit. If that site, on MPSCS, is the primary thing you are monitoring, and you are using your WS1065 as a base (at home, not in your vehicle), you might try moving it around, trying different locations in the room. Simulcast digital distortion - The RadioReference Wiki If you are getting broken, or sometimes garbled, audio in reception, or missing a lot of calls, simulcast may be your issue, Read this Wiki article for an extended discussion of the problems it causes: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |